gary's clocks

Download Plans for Clock 2003 Here

Last Revised: 19 November 2004

Here it is. All of the drawings to make Clock 2003.

You will find full scale color and black and white drawings in pdf format.

Be sure to zoom in on the pdf vector graphics on your computer.

Most of the detail drawings can be printed full scale on 8.5x11 in paper.

There are also ACAD and DXF versions of the drawings.

Enjoy!


Parts List and General Assembly-Clock 2003

A-C03-0020-general-assy-Clock-2003-rev2.pdf
sht1-clock2003-assy sht-2-clock2003


Clock 2003 General Overview

Clock 2003 (364kb)

gears-clock2003 clock 2003


Clock 2003 DXF files

Here is the ACAD drawing for the gears and baseplates used to make this clock.

These parts are suitable for CNC.

The shafting and pendulum parts you can derive from the pdf files below.

The DXF or ACAD file is Full Scale in inches.

clock 2003 dwgclock-2003-dxf.zip

Notes about the PDF files:

The PDF Assembly drawings are not necessarily full scale.
Most of the PDF files are drawn on 8.5x11 inch paper. Some of the parts and assemblies are bigger than an 8.5x11 inch sheet so they are simply scaled down.
This makes it easy to print the plans but means you won't be able to measure from these assembly drawings unless you are very careful.

I've posted up a full scale drawing of the whole assembly in color and Black and white but you'll need access to a really big printer to print it full scale.
Big printers do exist but the cost of big prints for most of you will be prohibitive.


Full Color Assembly Drawings for Clock 2003

Clock-2003-Gen Assy-full-scale-color-rev1.pdf
clock2003color

Clock-2003-Gen Assy-full-scale-b-and-w-rev-1.pdf
550k clock2003bw


A-C03-0001-baseplates-rev2.pdf
a-c03-0001


A-C03-0002-Baseplate-Rear-Clock-rev 2.pdf
a-c03-0002


A-C03-0003-Baseplate-Front-Clock-rev-2.pdf
a-c03-0003


A-C03-0004-Idler-Hour-Hand-Assy-rev2.pdf
a-c03-0004


A-C03-0005-minute-gears-2003-rev2.pdf
a-c03-0005


A-C03-0006-Hour-Wheel-on-Cannon-rev2.pdf
a-c03-0006


A-C03-0007-Pendulum-2003-Assy-rev-2.pdf
thmb-0007


A-C03-0008-Pendulum-Extension-Rods-rev-2.pdf
0008


A-C03-0009-Pendulum-Weight-Adju.pdf
a-c03-0009


A-C03-0010-Weight-Right-Clock-2003.pdf
a-c03-0010


A-C03-0012-Ratchet-Wheel-Clock-rev2.pdf
a-c03-0012


A-C03-0013-Ratchet-Shaft-Windup-rev2.pdf
a-c03-0013


A-C03-0014-Ratchet-Gear-Wheel-and-springs-rev2.pdf
a-c03-0014


A-C03-0015-Pulley-Single-Bearing-rev-2.pdf
0015


A-C03-0016-tick-tock-lever-2003-rev-2.pdf
0016


A-C03-0017-tick-tock-wheel-2003-rev-2.pdf
0017


A-C03-0018-intermediate-wheel-pinion-2-rev-2.pdf
0018


A-C03-0019-intermediate-wheel-p.pdf
a-c03-0019


A-C03-0021-wall-mount-plates.pdf
a-c03-0021


A-C03-0022-minute-gear-sprocket-pair-idler-rev1.pdf
a-c03-0022


A-C03-0023-minute-big-shaft-rev1.pdf
a-c03-0023


Full Scale Black and White part drawings for Clock 2003

Most of these part drawings will print full scale on 8.5x11 paper.

Some of the larger pieces will have to be printed on D size paper.

You should be able to get a lot of benefit by viewing the larger drawings on your computer even if you are unable to print the big ones.


p-c03-0001-baseplate-rear-full.pdf
p-c03-0001


P-C03-0003-pivot-pendulum-rev-1.pdf
p-c03-0003


P-C03-0004-safety-pendulum-stop-rev-1.pdf
p-c03-0004


P-C03-0005-standoff-full-rev1.pdf
p-c03-0005


P-C03-0014-baseplate-front-full-rev1.pdf
p-c03-0014

P-C03-0017-idler-shaft-hour-hand-full-rev1.pdf
p-c03-0017

P-C03-0018-tapered-dowel-wheel-lock-rev-1.pdf
p-c03-0018


P-C03-0019-40 T-wheel-10DP-match-to-pinion-16t-rev-1.pdf
p-c03-0019


P-C03-0020-10T-pinion-1035dp-250-rev-1.pdf
p-c03-0020


P-C03-0021-shaft-minute-rev1.pdf
p-c03-0021


P-C03-0022-20-T-pinion-10DP-375-rev1.pdf
p-c03-0022

P-C03-0023-64-T-wheel-10DP-match-pinion-10t-rev1.pdf
p-c03-0023


P-C03-0024-key-hour-idler-rev1.pdf
p-c03-0024


P-C03-0025-hand-minute-rev1.pdf
p-c03-0025


P-C03-0026-cannon-tube-rev1.pdf
p-co3-0026


P-C03-0027-48-T-wheel-1035-rev1.pdf
p-c03-0027

P-C03-0028-hand-hour-rev1.pdf
p-c03-0028


P-C03-0029-drum-string-ratchet-rev1.pdf
p-c03=0029


P-C03-0030-shaft-ratchet-rev1.pdf
p-c03-0030


P-C03-0031-ratchet-wheel-rev1.pdf
p-c03-0031


P-C03-0032-72-ratchet-wheel-10dp-rev1.pdf
p-c03-0072


P-C03-0033-ratchet-stricker-rev1.pdf
p-c03-0033


P-C03-0034-spring-ratcher-striker-rev1.pdf
p-c03-0034


P-C03-0035-spacer-ratchet-lever-rev1.pdf
p-c03-0035


P-C03-0036-pulley-single-bearing-rev1.pdf
p-c03-0036


P-C03-0037-bearing-clamp-lock-for-pulley-rev1.pdf
p-c03-0037


P-C03-0038-Standoff-pulley-clock2003-rev1.pdf
p-c03-0038


P-C03-0039-shaft-tick-tock-lever-rev1.pdf
p-c03-0039


P-C03-0040-tick-tock-lever-rev1.pdf
p-c03-0040


P-C03-0041-shaft-tick-tock-rev1.pdf
p-c03-0041


P-C03-0042-10T-pinion-10DP-250tthk-escape-wheel-rev1.pdf
p-c03-0042


P-C03-0043-10T-pinion-10DP-250thk-rev1.pdf
p-c03-0043

P-C03-0044-10t-pinion-10DP375thk-rev1.pdf
p-c04-0044


P-C03-0045-24t-pinion-10DP-375thk-rev1.pdf
p-c03-0045
An extra part not used on this clock


P-C03-0046-escapment-wheel-18T-span7-rev1.pdf
p-c03-0046


P-C03-0047-shaft-intermed2-rev1.pdf
p-c03-0047


P-C03-0048-30T-wheel-10DP-match-pinion-10-rev1.pdf
p-c03-0048


P-C03-0049-shaft-intermed-3-rev1.pdf
p-c03-0049


P-C03-0050-10t-pinion-10DP375thk-10shft-rev1.pdf
p-c03-0050


P-C03-0051-55T-wheel-10DP-match-pinion-10dp-rev1.pdf
p-c03-0051


P-C03-0052-knife-pendulum-rev1.pdf
p-c03-0052


P-C03-0053-pendulum-top-disc-rev1.pdf
p-c03-0053


P-C03-0054-pendulum-bottom-disc-rev1.pdf
p-c03-0054


P-C03-0055-pendulum-striker-wheel-rev1.pdf
p-c03-0055


P-C03-0056-pendulum-contact-cross-plate-rev1.pdf
p-c03-0056


P-C03-0057-pendulum-weight-rev1.pdf
p-c03-0057


P-C03-0058-pendulum-stick-rev1.pdf
p-c03-0058


P-C03-0060-pendulum-adjust-rod-rev1.pdf
p-c03-0060


P-C03-0062-wall mount plate-rev-1.pdf
p-c03-0062


P-C03-0063-16T-pinion-10DP-250thk-w-key-rev1.pdf
p-c03-0063


P-C03-0064-hardware-assorted-rev1.pdf
p-c03-0064

P-C03-0065-bushings-rev1.pdf
p-c03-0065


top of page

gary's clocks